24k Gold Foil
24k Gold Foil (0.013mm thick)
1pc - 2" x 1.56" (0.013mm thick)
Perfect for keum bu projects. Thick enough to be cut with small scissors.
650/1200 Low Fire Syringe w/o tip (5g)
Art Clay Silver 650/1200 Low Fire Syringe w/o tip (5g)
More info...
Art Clay Silver 650/1200 Syringe consists of pure silver particles, a
binding agent, and water. The binding agent is produced from harmless
pulp fiber. During firing, the pure silver particles solidify. The
binding agent consists of carbon, hydrogen, and oxygen resulting in the
release of harmless carbon dioxide and steam during firing.
This
product is low-fire clay that can be fired at 650 ºC/1200 ºF and is pure
silver (99.9%) after firing. The special formula of this product allows
for combination with glass, porcelain and ceramic materials, and also
suitable for firing with sterling silver findings or wires (SV925 and
higher quality recommended with a firing temperature of 650 ºC/1200 ºF,
with a recommended holding time of 30 minutes). Do not fire a soldered
piece with 650/1200 Syringe as the soldering temperature is lower than
the firing temperature. [Instructions] This product is water-based and
can dry up. Always keep the syringe tightly capped. By using syringe
type clay, you can draw designs directly onto pieces (clay type or paste
type) and create subtle patterns which were formerly difficult to
produce with conventional materials. The piece should only be fired
after it is completely dry. Attach the nozzle firmly onto the tip of the
syringe; otherwise, the nozzle may come off when extruding clay. The
tip of the nozzle is delicate, do not bend, squeeze, or press it against
a hard surface. After use replace the protective cap. Wrap the nozzle
with a wet tissue or gauze to avoid drying. After use, remember to
completely clean out any remaining clay from the nozzle (Recommendation:
use an empty syringe filled with water). Some kilns display a different
temperature from the actual inside temperature. It is known that silver
will melt at 961 ºC/1763 ºF. It is recommended that your kiln firing
temperature does not exceed 900 ºC/1652 ºF.
You may combine
650/1200 Syringe with the original silver clay series (clay, paste and
syringe types), but the firing condition should be the same as the
original clay series. You may combine 650/1200 Syringe with other
650/1200 series products (i.e. clay, paste and syringe types). Do not
bend any fired piece with unreasonable pressure. Keep the clay indoors,
out of direct sunlight, and do not store in a refrigerator. For best
results use clay as soon as possible after opening the package.
A. $50 Gift Certificate
$50 gift certificate for only 45!
Can be used towards any items available on the website.
We will send you a nice gift certificate along with a catalogue.
Take the guess work out Christmas shopping.
Specials and Discounts do not apply on Gift Certificates.
AGS 24 Kt. Gold Paint
(A-021) Accent Gold for Silver - 24kt Gold Paint (1 gram). Add gold accents to your previously fired ACS creations. Requires kiln or torch firing. Cannot be fired with a gas stovetop.
BRONZclay 100 Gram Pack
New BRONZclay™ provides an incredible artistic range. And, because it is bronze, it is also so economical that you can use it for large pieces—even sculptures—very affordably!
Please note: BRONZclay™ must be embedded in activated carbon during firing. Carbon and container are sold separately.
1-2 paquets = $26.65 par paquet
3-5 paquets = $25.31 par paquet
6-9 paquets = $24.10 par paquet
10 et plus = $22.86 par paquet
BRONZclay 200 Gram Pack
The new BRONZclay in 200 gram pack.
Price breaks on quantities as follow:
Prices will automatically be adjusted in cart
1-2 paquets = $46.13 par paquet
3-5 paquets = $43.77 par paquet
6-9 paquets = $41.46 par paquet
10 et plus = $39.42 par paquet
Bronzclay firing Pan with Coal Carbon
This is a small firing pan size is 4"x3"x2" - stainless steel filled with Acid washed coal carbon.
Coal carbon produces beautiful patinas on the bronze.
This can be used for firing Bronzclay and Copprclay.
Click into long description for examples of the patina on bronze
C. $150 Gift Certificate
$150 gift certificate!
Can be used towards any items available on the website.
We will send you a nice gift certificate along with a catalogue.
Take the guess work out Christmas shopping.
Specials and Discounts do not apply on Gift Certificates.
Certification Level 1
Level 1 Certification Aug.20, 21, 22 & 23 - 2010
Only 2 spots left!!
Instructor Carrie Steele View Biography here
$100 is deposit full course is $850 plus gst
Earn your Level 1 Certification in Art Clay Silver in our Art Clay Canada Studio Sherwood Park, Alberta. Price is for Deposit of 100 towards full price of $850 plus GST
COPPRclay 100 Gram Pack
New COPPRclay™ provides an incredible artistic range. And, because it is Copper, it is also so economical that you can use it for large pieces—even sculptures—very affordably!
1-2 paquets = $26.65 par paquet
3-5 paquets = $25.31 par paquet
6-9 paquets = $24.10 par paquet
10 et plus = $22.86 par paquet
COPPRclay 200 Gram Pack
The new COPPRclay in 200 gram pack. Price breaks on quantities as follow:
Prices will automatically be adjusted in cart
1-2 paquets = $46.13 par paquet
3-5 paquets = $43.77 par paquet
6-9 paquets = $41.46 par paquet
10 et plus = $39.42 par paquet
D. $200 Gift Certificate
$200 gift certificate. Can be used towards any items available on the website.
We will send you a nice gift certificate along with a catalogue.
Take the guess work out Christmas shopping
Excludes sale items or any other discounts.
Specials and Discounts do not apply on Gift Certificates.
E. $250 Gift Certificate
$250 gift certificate. Can be used towards any items available on the website.
We will send you a nice gift certificate along with a catalogue.
Take the guess work out Christmas shopping.
Specials and Discounts do not apply on Gift Certificates.
FastFire BronzClay 100 g
FastFire BronzClay is here!!
Shorter time to fire, same great working time, a little yellower after firing.
Less shrinking!
Price is for a 100 gram pack.
Composition: 10% tin, 90% copper, water & non-toxic binding materials
Shrinkage: 5–10%
Firing Temp.: 1525°F (830°C) for 2 hours (after a fast ramp to temperature)
More info...The faster way to fire! FASTfire BRONZEclay™ drastically cuts your firing time—making it ideal for production work, the classroom, or for those times when you just want to bring your creations to life a bit quicker.
With FASTfire BRONZclay, you can fire your pieces in 2 hours or less (depending on the thickness of your piece, the size of your firing pan, and the type of kiln).
Just like original BRONZclay, FASTfire™ BRONZclay provides an incredible artistic range. And, because it is bronze, it is also so economical that you can use it for large pieces—even sculptures—very affordably! It can be pinched, rolled, sculpted, cut or manipulated any way you like. Then fire it, and the binder burns away, leaving a solid, pure bronze object. Create jewelry, jewelry components, or custom-crafted specialized tools.
Please Note: FASTfire BRONZclay™ must be embedded in coconut shell–activated carbon inside a firing pan with a slotted lid during firing. Carbon, firing pan and lid are sold separately. Because kilns vary, try a test piece in your kiln according to the enclosed instructions.
FastFire BronzClay 200 g
FastFire BronzClay is here!!
Shorter time to fire, same great working time, a little yellower after firing.
Less shrinking!
Price is for a 200 gram pack.
Composition: 10% tin, 90% copper, water & non-toxic binding materials
Shrinkage: 5–10%
Firing Temp.: 1525°F (830°C) for 2 hours (after a fast ramp to temperature)
More info...The faster way to fire! FASTfire BRONZEclay™ drastically cuts your firing time—making it ideal for production work, the classroom, or for those times when you just want to bring your creations to life a bit quicker.
With FASTfire BRONZclay, you can fire your pieces in 2 hours or less (depending on the thickness of your piece, the size of your firing pan, and the type of kiln).
Just like original BRONZclay, FASTfire™ BRONZclay provides an incredible artistic range. And, because it is bronze, it is also so economical that you can use it for large pieces—even sculptures—very affordably! It can be pinched, rolled, sculpted, cut or manipulated any way you like. Then fire it, and the binder burns away, leaving a solid, pure bronze object. Create jewelry, jewelry components, or custom-crafted specialized tools.
Please Note: FASTfire BRONZclay™ must be embedded in coconut shell–activated carbon inside a firing pan with a slotted lid during firing. Carbon, firing pan and lid are sold separately. Because kilns vary, try a test piece in your kiln according to the enclosed instructions.
Level 1 Art Clay Certification
Level 1 Certification Sept. 9,10,11 & 12 - 2010
Only 3 spots available
Instructor Carrie Steele View Biography here
$100 is deposit full course is $850 plus gst
Earn your Level 1 Certification in Art Clay Silver in our Art Clay
Canada Studio Sherwood Park, Alberta. Price is for Deposit of 100
towards full price of $850 plus GST
Level 1 Certification -London Ontario
Toronto, Ontario Level 1 Art Clay Certification
Teaching artist is Carrie Steele & possibly sculptor and Senior Instructor Cara-Lee Ireland.
This certification is a go. Dates will be from Saturday May 15 thru Tuesday, May 18, 2010.
The course will be held at Jewellery Werx in London, Ontario. Call toll free at 1-877-652-8585 or call Art Clay Canada at 1-877-410-CLAY
Please note $300 is a deposit only (remainder to be paid upon completion of Certification). The full cost is $850 plus gst.
Price includes all materials, instruction and use of tools for the full 4 days.
Syringe Attachment
syringe attachment for art clay silver syringe. Having trouble squeezing the syringe? This attachement will make the job much easier & your design will be cleaner
Art Clay Silver
Vancouver Aug. Certification
We are working with a fabulous group of people from the EMA Society and ClayZone of Vancouver to provide a certification course right in the heart of Vancouver.
Normally, this course is over $1100, but we are holding it for $850/person including all supplies, materials, instructions.
10 packs of 7gram clay
GREAT STUDENT TEACHER PACK
7 gram packs are great for teaching and at this price why not get the packaged up clay !!
Also great when you want consistancy in sizes and grams, so you know exactly what to charge for your designs.
Low Fire 50 gram Clay - 3 Packs
We are clearing out some stock to make room for some exciting new products.
The price is for 3 pack of 50 gram Low Fire clay. We only have 10 of these available so don't delay. Stock up and save.
Volume discounts and other coupon codes cannot be applied to this sale item.
650/1200 Low Fire Silver Syringe No Tip
Art Clay Silver 650/1200 Syringe consists of pure silver particles, a binding agent, and water.
More info...
Art Clay Silver 650/1200 Syringe consists of pure silver particles, a
binding agent, and water. The binding agent is produced from harmless
pulp fiber. During firing, the pure silver particles solidify. The
binding agent consists of carbon, hydrogen, and oxygen resulting in the
release of harmless carbon dioxide and steam during firing.
This
product is low-fire clay that can be fired at 650 ºC/1200 ºF and is pure
silver (99.9%) after firing. The special formula of this product allows
for combination with glass, porcelain and ceramic materials, and also
suitable for firing with sterling silver findings or wires (SV925 and
higher quality recommended with a firing temperature of 650 ºC/1200 ºF,
with a recommended holding time of 30 minutes). Do not fire a soldered
piece with 650/1200 Syringe as the soldering temperature is lower than
the firing temperature. [Instructions] This product is water-based and
can dry up. Always keep the syringe tightly capped. By using syringe
type clay, you can draw designs directly onto pieces (clay type or paste
type) and create subtle patterns which were formerly difficult to
produce with conventional materials. The piece should only be fired
after it is completely dry. Attach the nozzle firmly onto the tip of the
syringe; otherwise, the nozzle may come off when extruding clay. The
tip of the nozzle is delicate, do not bend, squeeze, or press it against
a hard surface. After use replace the protective cap. Wrap the nozzle
with a wet tissue or gauze to avoid drying. After use, remember to
completely clean out any remaining clay from the nozzle (Recommendation:
use an empty syringe filled with water). Some kilns display a different
temperature from the actual inside temperature. It is known that silver
will melt at 961 ºC/1763 ºF. It is recommended that your kiln firing
temperature does not exceed 900 ºC/1652 ºF.
You may combine
650/1200 Syringe with the original silver clay series (clay, paste and
syringe types), but the firing condition should be the same as the
original clay series. You may combine 650/1200 Syringe with other
650/1200 series products (i.e. clay, paste and syringe types). Do not
bend any fired piece with unreasonable pressure. Keep the clay indoors,
out of direct sunlight, and do not store in a refrigerator. For best
results use clay as soon as possible after opening the package.
650/1200 Low Fire Silver Syringe 1 Tip
Art Clay Silver 650/1200 Syringe consists of pure silver particles, a binding agent, and water.
More info...
Art Clay Silver 650/1200 Syringe consists of pure silver particles, a binding agent, and water. The binding agent is produced from harmless pulp fiber. During firing, the pure silver particles solidify. The binding agent consists of carbon, hydrogen, and oxygen resulting in the release of harmless carbon dioxide and steam during firing.
This product is low-fire clay that can be fired at 650 ºC/1200 ºF and is pure silver (99.9%) after firing. The special formula of this product allows for combination with glass, porcelain and ceramic materials, and also suitable for firing with sterling silver findings or wires (SV925 and higher quality recommended with a firing temperature of 650 ºC/1200 ºF, with a recommended holding time of 30 minutes). Do not fire a soldered piece with 650/1200 Syringe as the soldering temperature is lower than the firing temperature. [Instructions] This product is water-based and can dry up. Always keep the syringe tightly capped. By using syringe type clay, you can draw designs directly onto pieces (clay type or paste type) and create subtle patterns which were formerly difficult to produce with conventional materials. The piece should only be fired after it is completely dry. Attach the nozzle firmly onto the tip of the syringe; otherwise, the nozzle may come off when extruding clay. The tip of the nozzle is delicate, do not bend, squeeze, or press it against a hard surface. After use replace the protective cap. Wrap the nozzle with a wet tissue or gauze to avoid drying. After use, remember to completely clean out any remaining clay from the nozzle (Recommendation: use an empty syringe filled with water). Some kilns display a different temperature from the actual inside temperature. It is known that silver will melt at 961 ºC/1763 ºF. It is recommended that your kiln firing temperature does not exceed 900 ºC/1652 ºF.
You may combine 650/1200 Syringe with the original silver clay series (clay, paste and syringe types), but the firing condition should be the same as the original clay series. You may combine 650/1200 Syringe with other 650/1200 series products (i.e. clay, paste and syringe types). Do not bend any fired piece with unreasonable pressure. Keep the clay indoors, out of direct sunlight, and do not store in a refrigerator. For best results use clay as soon as possible after opening the package.
650/1200 Low Fire Slow Dry Clay 10g
Art Clay Silver 650/1200 Low Fire Slow Dry Clay consists of pure silver
particles, a binding agent and water. The binding agent is produced from
harmless pulp fiber. During firing, the pure silver particles solidify.
The binding agent consists of carbon, hydrogen, and oxygen, resulting
in the release of harmless carbon dioxide and steam during firing.
More info...
This
product is low-fire clay that can be fired at 650ºC/1200ºF and is pure
silver (99.9%) after firing. The special formula of this product allows
for combination with glass, porcelain and ceramic materials, and also
suitable for firing with sterling silver findings or wires (SV925 and
higher quality recommended). Do not fire a soldered piece with 650/1200
Low Fire Slow Dry Clay as the soldering temperature is lower than the
firing temperature. The 650/1200 Low Fire Slow Dry Clay contains a
moisturizing binder to keep the clay from drying while working. The
moister formula allows for braiding, weaving, and generally gives the
artist up to 4 times more working time. Working time may vary by the
users environment. It is a wonderful product for those who live in dry
climates. [Instructions] This product is water-based. If the clay
becomes stiff during shaping, add a few drops of water and knead it
well. You can prevent the clay from sticking to your hands by rubbing
them with a few drops of olive oil first. Do not use rubber bands to
wrap the clay in plastic wrap, they may discolor the clay. Some kilns
display a different temperature from the actual inside temperature. It
is known that silver will melt at 961ºC/1763ºF. It is recommended that
your kiln firing temperature does not exceed 900ºC/1652ºF. Take out only
the necessary amount of clay. Place any remaining clay back in the
original 650/1200 Low Fire Slow Dry Clay bag (or a zip-loc bag) and keep
it in a sealed container to prevent it from drying out. You may combine
650/1200 Low Fire Slow Dry clay with the original silver clay series,
but the firing condition should be the same as the original clay series.
You may also combine 650/1200 Low Fire Slow Dry Clay with any
650/1200 series products (the firing condition is the same for both). If
the clay is not completely dry, it can crack during firing. Do not bend
any fired piece with unreasonable pressure. Keep the clay indoors, out
of direct sunlight, and do not store in a refrigerator. For best results
use the clay as soon as possible after opening the package.
650/1200 Low Fire Slow Dry Clay 20g
Art Clay Silver 650/1200 Low Fire Slow Dry Clay consists of pure silver particles, a binding agent and water. The binding agent is produced from harmless pulp fiber. During firing, the pure silver particles solidify. The binding agent consists of carbon, hydrogen, and oxygen, resulting in the release of harmless carbon dioxide and steam during firing. This product is low-fire clay that can be fired at 650ºC/1200ºF and is pure silver (99.9%) after firing.
More info...
The special formula of this product allows for combination with glass,
porcelain and ceramic materials, and also suitable for firing with
sterling silver findings or wires (SV925 and higher quality
recommended).
Do not fire a soldered piece with 650/1200 Low Fire
Slow Dry Clay as the soldering temperature is lower than the firing
temperature. The 650/1200 Low Fire Slow Dry Clay contains a moisturizing
binder to keep the clay from drying while working. The moister formula
allows for braiding, weaving, and generally gives the artist up to 4
times more working time. Working time may vary by the users environment.
It is a wonderful product for those who live in dry climates.
[Instructions]
This product is water-based. If the clay becomes
stiff during shaping, add a few drops of water and knead it well. You
can prevent the clay from sticking to your hands by rubbing them with a
few drops of olive oil first. Do not use rubber bands to wrap the clay
in plastic wrap, they may discolor the clay. Some kilns display a
different temperature from the actual inside temperature. It is known
that silver will melt at 961ºC/1763ºF. It is recommended that your kiln
firing temperature does not exceed 900ºC/1652ºF. Take out only the
necessary amount of clay. Place any remaining clay back in the original
650/1200 Low Fire Slow Dry Clay bag (or a zip-loc bag) and keep it in a
sealed container to prevent it from drying out.
You may combine
650/1200 Low Fire Slow Dry clay with the original silver clay series,
but the firing condition should be the same as the original clay series.
You may also combine 650/1200 Low Fire Slow Dry Clay with any 650/1200
series products (the firing condition is the same for both). If the clay
is not completely dry, it can crack during firing. Do not bend any
fired piece with unreasonable pressure. Keep the clay indoors, out of
direct sunlight, and do not store in a refrigerator. For best results
use the clay as soon as possible after opening the package.
650/1200 Low Fire Slow Dry Clay 50g
Art Clay Silver 650/1200 Low Fire Slow Dry Clay consists of pure silver
particles, a binding agent and water. The binding agent is produced from
harmless pulp fiber. During firing, the pure silver particles solidify.
The binding agent consists of carbon, hydrogen, and oxygen, resulting
in the release of harmless carbon dioxide and steam during firing.
More info...
This
product is low-fire clay that can be fired at 650ºC/1200ºF and is pure
silver (99.9%) after firing. The special formula of this product allows
for combination with glass, porcelain and ceramic materials, and also
suitable for firing with sterling silver findings or wires (SV925 and
higher quality recommended). Do not fire a soldered piece with 650/1200
Low Fire Slow Dry Clay as the soldering temperature is lower than the
firing temperature. The 650/1200 Low Fire Slow Dry Clay contains a
moisturizing binder to keep the clay from drying while working. The
moister formula allows for braiding, weaving, and generally gives the
artist up to 4 times more working time. Working time may vary by the
users environment. It is a wonderful product for those who live in dry
climates. [Instructions] This product is water-based. If the clay
becomes stiff during shaping, add a few drops of water and knead it
well. You can prevent the clay from sticking to your hands by rubbing
them with a few drops of olive oil first. Do not use rubber bands to
wrap the clay in plastic wrap, they may discolor the clay. Some kilns
display a different temperature from the actual inside temperature. It
is known that silver will melt at 961ºC/1763ºF. It is recommended that
your kiln firing temperature does not exceed 900ºC/1652ºF. Take out only
the necessary amount of clay. Place any remaining clay back in the
original 650/1200 Low Fire Slow Dry Clay bag (or a zip-loc bag) and keep
it in a sealed container to prevent it from drying out. You may combine
650/1200 Low Fire Slow Dry clay with the original silver clay series,
but the firing condition should be the same as the original clay series.
You may also combine 650/1200 Low Fire Slow Dry Clay with any
650/1200 series products (the firing condition is the same for both). If
the clay is not completely dry, it can crack during firing. Do not bend
any fired piece with unreasonable pressure. Keep the clay indoors, out
of direct sunlight, and do not store in a refrigerator. For best results
use the clay as soon as possible after opening the package.
650/1200 Low Fire Slow Dry Clay 7g
Art Clay Silver 650/1200 Low Fire Slow Dry Clay consists of pure silver particles, a binding agent and water. The binding agent is produced from harmless pulp fiber. During firing, the pure silver particles solidify. The binding agent consists of carbon, hydrogen, and oxygen, resulting in the release of harmless carbon dioxide and steam during firing.
More info...
This product is low-fire clay that can be fired at 650ºC/1200ºF and is
pure silver (99.9%) after firing. The special formula of this product
allows for combination with glass, porcelain and ceramic materials, and
also suitable for firing with sterling silver findings or wires (SV925
and higher quality recommended). Do not fire a soldered piece with
650/1200 Low Fire Slow Dry Clay as the soldering temperature is lower
than the firing temperature. The 650/1200 Low Fire Slow Dry Clay
contains a moisturizing binder to keep the clay from drying while
working. The moister formula allows for braiding, weaving, and generally
gives the artist up to 4 times more working time. Working time may vary
by the users environment. It is a wonderful product for those who live
in dry climates. [Instructions] This product is water-based. If the clay
becomes stiff during shaping, add a few drops of water and knead it
well. You can prevent the clay from sticking to your hands by rubbing
them with a few drops of olive oil first. Do not use rubber bands to
wrap the clay in plastic wrap, they may discolor the clay. Some kilns
display a different temperature from the actual inside temperature. It
is known that silver will melt at 961ºC/1763ºF. It is recommended that
your kiln firing temperature does not exceed 900ºC/1652ºF. Take out only
the necessary amount of clay. Place any remaining clay back in the
original 650/1200 Low Fire Slow Dry Clay bag (or a zip-loc bag) and keep
it in a sealed container to prevent it from drying out. You may combine
650/1200 Low Fire Slow Dry clay with the original silver clay series,
but the firing condition should be the same as the original clay series.
You may also combine 650/1200 Low Fire Slow Dry Clay with any
650/1200 series products (the firing condition is the same for both). If
the clay is not completely dry, it can crack during firing. Do not bend
any fired piece with unreasonable pressure. Keep the clay indoors, out
of direct sunlight, and do not store in a refrigerator. For best results
use the clay as soon as possible after opening the package.
650/1200 Low Fire 50g
(A-075) 650/1200 Low Fire Clay 50g package.
Use this clay if you are in an area with HIGH humidity.
Fire as low as 1200ºF! Great for use with glass and sterling silver. Resealable mylar packaging. Can also be fired with a butane torch or gas stovetop. During firing this clay shrinks between 8-9%.
650/1200 Low Fire Overlay Silver Paste 15g
Art Clay Silver 650/1200 Overlay Silver Paste (OSP) is "low-fire" silver clay in paste form, formulated specifically to use on glazed porcelain. We use Overlay Paste in stead of OIL PASTE as we find it is more effective & then YOU have one less product to buy ^_^
More info...
Art Clay Silver 650/1200 Overlay Silver Paste (OSP) is "low-fire" silver clay in paste form, formulated specifically to use on glazed porcelain. Overlay Silver Paste is in a viscous, liquid form and water soluble, so that you can express 3 dimensional drawings on a surface of porcelain, ceramic or glass.
After firing at appropriate temperature ranging from 650 ºC/1200 ºF to 800 ºC/1472 ºF, it will turn into 99.9% silver. During firing, the pure silver powder solidifies. The binding agent consists of carbon, hydrogen and oxygen resulting in the release of harmless carbon dioxide and steam during firing. [Instructions] Some silver settling may occur at bottom of the jar. Stir the paste well with a brush or metal spatula before use.
This product is water-based and can dry. Always keep the container tightly capped. If it dries, add a small amount of water to re-hydrate. To dilute the paste, take out the necessary amount and place it in a separate container. Then, add water a drop at a time. Do not dilute it directly in the bottle. It is important that your kiln €™s pyrometer is functioning properly. Always be sure to ventilate the workroom when using a kiln.
650/1200 Low Fire Silver Paste 10g
Art Clay Silver 650/1200 Paste consists of pure silver particles, a binding agent and water.
Art Clay Silver 650/1200 Paste consists of pure silver particles, a binding agent and water. The binding agent is produced from harmless pulp fiber. During firing, the pure silver particles solidify. The binding agent consists of carbon, hydrogen, and oxygen resulting in the release of harmless carbon dioxide and steam during firing. This product is low-fire clay that can be fired at 650 ºC/1200 ºF, and is pure silver (99.9%) after firing.
More info...
The special formula of this product allows for combination with glass,
porcelain and ceramic materials, and is also suitable for firing with
sterling silver findings or wires (SV925 and higher quality
recommended). Do not fire a soldered piece with 650/1200 Paste as the
soldering temperature is lower than the firing temperature.
[Instructions] Some silver settling may occur at the bottom of the jar.
Stir the paste well with a brush or a metal spatula before use. To
dilute the paste take out the necessary amount and place it in a
different container. (Do not dilute directly in bottle.)
This
product is water-based and can dry up. Always keep the container tightly
capped. (If it becomes too thick, add a little water and stir well)
Wash the paste off your hands with water after use. The clay may crack
during firing if it is not completely dry. Some kilns display a
different temperature from the actual inside temperature. It is known
that silver will melt at 961 ºC/1763 ºF. It is recommended that your
kiln firing temperature does not exceed 900 ºC/1652 ºF. You may combine
650/1200 Paste with the original silver clay series (clay, paste and
syringe types), but the firing conditions should be the same as the
original clay series. You may combine 650/1200 Paste with any other
650/1200 series product (clay, paste and syringe types). Do not bend the
fired piece with unreasonable pressure. Keep the clay indoors, out of
direct sunlight, and do not store in a refrigerator. For best results
use the clay as soon as possible after opening the package.
650/1200 Low Fire Silver Paste 20g
Art Clay Silver 650/1200 Paste consists of pure silver particles, a binding agent and water.
Art Clay Silver 650/1200 Paste consists of pure silver particles, a
binding agent and water. The binding agent is produced from harmless
pulp fiber. During firing, the pure silver particles solidify. The
binding agent consists of carbon, hydrogen, and oxygen resulting in the
release of harmless carbon dioxide and steam during firing. This product
is low-fire clay that can be fired at 650 ºC/1200 ºF, and is pure
silver (99.9%) after firing. The special formula of this product allows
for combination with glass, porcelain and ceramic materials, and is also
suitable for firing with sterling silver findings or wires (SV925 and
higher quality recommended). Do not fire a soldered piece with 650/1200
Paste as the soldering temperature is lower than the firing temperature.
More info...
[Instructions]
Some silver settling may occur at the bottom of the jar. Stir the paste well with a brush or a metal spatula before use. To dilute the paste take out the necessary amount and place it in a different container. (Do not dilute directly in bottle.)
This product is water-based and can dry up. Always keep the container tightly capped. (If it becomes too thick, add a little water and stir well) Wash the paste off your hands with water after use. The clay may crack during firing if it is not completely dry. Some kilns display a different temperature from the actual inside temperature. It is known that silver will melt at 961 ºC/1763 ºF. It is recommended that your kiln firing temperature does not exceed 900 ºC/1652 ºF. You may combine 650/1200 Paste with the original silver clay series (clay, paste and syringe types), but the firing conditions should be the same as the original clay series. You may combine 650/1200 Paste with any other 650/1200 series product (clay, paste and syringe types). Do not bend the fired piece with unreasonable pressure. Keep the clay indoors, out of direct sunlight, and do not store in a refrigerator. For best results use the clay as soon as possible after opening the package.
B. $100 Gift Certificate
$100 gift certificate for only 89!
Can be used towards any items available on the website. We will send you a nice gift certificate along with a catalogue. Take the guess work out Christmas shopping.
Coupons vaild until Dec. 2010
Specials and Discounts do not apply on Gift Certificates.
Art Clay Copper 50 gram pk
This is the newest addition to the Art Clay line of metal clay products. Art Clay Copper only requires a 30 minute kiln firing time and does not require activated carbon or a firing pan. This clay is perfect for use with the Paragon SC-2 kiln! The clay shrinks a little under 10% during the firing process.
Art Clay Copper Instruction Booklet
Slow Dry/Low Fire 50 gram clay - 3 packs
A great buy on a limited quanity 3 packs of 50 gram low fire slow dry. Don't delay...stock up today.
Volume discounts and other coupon codes cannot be applied to this sale item.
Art Clay Silver 650/1200 Low Fire Slow Dry Clay consists of pure silver
particles, a binding agent and water. The binding agent is produced from
harmless pulp fiber. During firing, the pure silver particles solidify.
The binding agent consists of carbon, hydrogen, and oxygen, resulting
in the release of harmless carbon dioxide and steam during firing.
More info...
This
product is low-fire clay that can be fired at 650ºC/1200ºF and is pure
silver (99.9%) after firing. The special formula of this product allows
for combination with glass, porcelain and ceramic materials, and also
suitable for firing with sterling silver findings or wires (SV925 and
higher quality recommended). Do not fire a soldered piece with 650/1200
Low Fire Slow Dry Clay as the soldering temperature is lower than the
firing temperature. The 650/1200 Low Fire Slow Dry Clay contains a
moisturizing binder to keep the clay from drying while working. The
moister formula allows for braiding, weaving, and generally gives the
artist up to 4 times more working time. Working time may vary by the
users environment. It is a wonderful product for those who live in dry
climates. [Instructions] This product is water-based. If the clay
becomes stiff during shaping, add a few drops of water and knead it
well. You can prevent the clay from sticking to your hands by rubbing
them with a few drops of olive oil first. Do not use rubber bands to
wrap the clay in plastic wrap, they may discolor the clay. Some kilns
display a different temperature from the actual inside temperature. It
is known that silver will melt at 961ºC/1763ºF. It is recommended that
your kiln firing temperature does not exceed 900ºC/1652ºF. Take out only
the necessary amount of clay. Place any remaining clay back in the
original 650/1200 Low Fire Slow Dry Clay bag (or a zip-loc bag) and keep
it in a sealed container to prevent it from drying out. You may combine
650/1200 Low Fire Slow Dry clay with the original silver clay series,
but the firing condition should be the same as the original clay series.
You may also combine 650/1200 Low Fire Slow Dry Clay with any
650/1200 series products (the firing condition is the same for both). If
the clay is not completely dry, it can crack during firing. Do not bend
any fired piece with unreasonable pressure. Keep the clay indoors, out
of direct sunlight, and do not store in a refrigerator. For best results
use the clay as soon as possible after opening the package.
- Out of stock
$235.80
Quantity : 0
Low Fire 20 gram Clay - 5 packs
Great buy on 20 gram packs. Price is for 5 packs of 20 gram clay. Limited quantity available.
Volume discounts and other coupon codes cannot be applied to this sale item.
More info...
- Out of stock
$164.04
Quantity : 0
QuicKit
(STQ-02) Create pure silver jewelry with your gas stove! Everything you need to mold, shape, fire, and finish Art Clay Silver creations.
Includes:
20g Art Clay Silver 650/1200 Low Fire Clay (A-054),
10g Art Clay Silver 650/1200 Syringe - One Tip (A-068),
Your Personal Guide to Art Clay Silver -
Instruction Pamphlet (S-014),
Stovetop Firing Guide - How to fire Art Clay pieces using a gas stove,
Non-Stick work surface (F-005),
Plastic Roller (F-003),
Plastic Strips (F-007),
Spatula clean-up tool (R-007),
Adjustable Ring Sizer (RS-01), Mini File Set (F-020),
1/4 sheet of 600, 1200, 2000 grit Wet/Dry Sandpaper, Stainless Steel Net (F-018),
Tweezers (F-016),
Stainless Steel Brush (F-030),
Polishing Cloth (F-034)
Art Clay Silver Low Fire Clay 10 g
This is for 1 package of Art Clay Silver, 10 grams, low fire clay.
Use this clay if you are in a geographical location with HIGH humidity.
Art Clay Silver - Low fire 7gram
This is for 1 package of Art Clay Silver, 7 grams, low fire clay.
Use this clay if you are in a geographical location with HIGH humidity.
Paper Type 10g
As this product has different characteristics from other ART CLAY SILVER products, please read the precautions and directions before use.
More info...
Art Clay Silver Paper Type is a precious metal material that is composed of pure silver (99.9%) after firing. You can easily fold, bend, punch or cut shapes with a pair of scissors or paper punches, just like you do with regular paper. You can easily apply techniques from Origami, paper-crafting, fabric and leather crafting.
- Out of stock
$39.77
Quantity : 0
Art Clay Gold Paste 22k (1.5g)
Art Clay Gold Paste (1.5g) 22K
We have had success torch firing with this product, please call us toll free to discuss 1-877-410-CLAY (2529)
